Asbestos cement sheet is weatherproof, durable, corrosion-resist, heat insulating. All these properties contribute it an ideal construction material.
Three types of asbestos cement products at stock - flat sheet, corrugated sheet and coated corrugated sheet.
Flat sheet is mainly applied for equipment and constructions. In steel making factory, it can be used in vacuum furnace, smelting furnace, heating equipment for its exceptional thermal insulation. In constructions, it can be used in commercial buildings, shopping malls, hotels, factories, warehouses, tunnels, theaters, stations and hospitals. Asbestos cement sheet has a collection of fire insulation, waterproof, noise insulation.
| Length | 1750 ±10mm |
| Width | 1110 ±6mm |
| Thickness | 8-10 ±1.0mm |
| flexural strength | ≥ 18.0 MPa |
| Density | ≥ 1.6 g / cm3 |
| Impact strength | ≥ 2.0 kJ / m2 |
| Frost resistance | 25 cycles |
| Residual strength | ≥90% |
Corrugated sheets, or roofing sheets, are widely used in attic roofs, furnace curtain, residence, public and agricultural buildings.
| Length | 1750 ±15mm |
| Width | 1130 ±5mm |
| Thickness | 5.8 ±0.3mm |
| Ordinary wave height | 40 ±4.0mm |
| Overlapping wave height | 40 ±6.0mm |
| Overlapped wave height, mm | 32 ±6.0mm |
| The width of the overlapping wave | 43 ±7.0mm |
| Width overlapped wave | 37mm |
| Step wave | 150mm |
| The flexural strength | not less than 16.0 |
| Density (bulk density) | ≥ 1.6 MPa |
| Impact strength | ≥ 1.50kJ / m2 |
| Frost resistance | 25 cycles |
| Water resistance | ≥ 24 hours |
| Residual strength | ≥ 90% |
Coated sheet is coated with colorful polymer which adds fashion elements to buildings, such as attic roofs, schools, theaters and so on.
| Length | 1750 ±15mm |
| Width | 1130 ±5mm |
| Thickness | 5.8 ±0.3mm |
| Ordinary wave height | 40 ±4.0mm |
| Overlapping wave height | 40 ±6.0mm |
| Overlapped wave height, mm | 32 ±6.0mm |
| The width of the overlapping wave | 43 ±7.0mm |
| Width overlapped wave | 37mm |
| Step wave | 150mm |
| The flexural strength | not less than 16.0 MPa |
| Density (bulk density) | ≥1.6 g / cm3 |
| Impact strength | ≥ 1.50kJ / m2 |
| Frost resistance | 25 cycles |
| Residual strength,% | ≥ 90% |
| Adhesion of the polymer coating to the sheeting, MPa | ≥ 1.0 MPa |
| Appearance | no cracks, bubbles, bundles |
| Color fastness | Δ E (A, B, L) |
| Heat resistance of the polymer coating sheets | 100% for 2 hours |
| Mark on frost resistance F 50, F 75, F 100 | No change the look of the polymer coating |
